TPT480 3.3V~5.0V Full Duplex RS-485 Transceivers

　　The TPT480 and TPT482 is IEC61000 ESD protected,which support±12 kV IEC contact and±15 kV IEC air discharge.3.0V~5.5V transceivers that meet the RS-485 and RS-422 standards for Full Duplex communication.Transmitters in this family deliver exceptional differential output voltages into the RS-485 required 54Ωload.The devices have very low bus currents so they present a true“1/8 unit load”to the RS-485 bus.This allows up to 256 transceivers on the network without using repeaters.Receiver(Rx)inputs feature a“Full Fail-Safe”design,which ensures a logic high Rx output if Rx inputs are floating,shorted,or on a terminated but undriven bus.The TPT480x is designed for full-duplex RS485,and support SOP8,DFN3X3-8 and SOP14 package,which is characterized from–40°C to 125°C.

　　Features

　　-Exceeds Requirements of Full Duplex EIA-485 Standard

　　-Hot Plug Circuitry-Tx and Rx Outputs Remain ThreeState During Power-up/Power-down

　　-Supply voltage:3.0V~5.5V

　　-Input Common-mode Range:-7V~+12 V

　　-Data Rate:32Mbps

　　-Up to 256 Nodes on a Bus(1/8 unit load)

　　-Full Fail-safe Receiver(Open,Short,Terminated)

　　-Bus-Pin Protection:

　　±20 kV HBM ESD

　　±12 kV IEC61000-4-2 Contact Discharge

　　±15 kV IEC61000-4-2 Air Discharge

　　-–40°C to 125°C Operation Temperature Range

　　Applications

　　-Home Appliance

　　-Motor Drives

　　-Industrial Control

　　-Grid Infrastructure

　　-Video Surveillance

　　-Communication Infrastructure