TPT7487 Isolated RS485 transceiver
The TPT7487 is a ±15 kV IEC61000 ESD protected, 3.0 V ~ 5.5 V isolated RS485 transceivers that meet the RS-485 and RS-422 standards for Half Duplex communication.
The TPT7488 is isolated Full Duplex RS485. The TPT748x features a fail-safe receiver, which support the output of the receiver to be logic high when the differential input (bus pin A/B) of the receiver is open, short or idle.
Transmitters in this family deliver exceptional differential output voltages into the RS-485 required 54 Ω load. The 500 kbps device has very low bus currents so they present a true “1/8 unit load” to the RS-485 bus. This allows up to 256 transceivers on the network without using repeaters. Receiver (Rx) inputs feature a “Full Fail-Safe” design, which ensures a logic high Rx output if Rx inputs are floating, shorted, or on a terminated but undriven bus.
The TPT748x is available in WSOP-16 package and is characterized from −40°C to +125°C.
Exceeds Requirements of EIA-485 Standard
Hot Plug Circuitry - Tx and Rx Outputs Remain
Three-State During Power-up/Power-down
Supply voltage: 3.0 V ~ 5.5 V
Data Rate: 500 kbps isolated RS485
Full Fail-safe Receiver (Open, Short, Terminated)
Up to 5 kV RMS Isolation Rating
10 kV Surge Capability
±150 kV/μs CMTI
Latch-Up performance exceeds 500 mA
Bus-Pin Protection:
− ±12 kV IEC61000-4-2 Contact Discharge
− ±15 kV IEC61000-4-2 Air Discharge
Safety-Related Certifications:
− VDE Reinforced Insulation according to DIN
VDE V 0884-11: 2017-01
− 5000 Vrms Isolation Rating per UL 1577
− CSA C22.2 No. 62368-1:19 3rd, IEC 62368-
1:2018 Ed. 3 and EN 62368-1:2020
− TUV Certification according to EN 60950-1
and EN 61010-1
− CQC Certification per GB4943.1-2011
Applications
Home Appliance
Motor Drives
Industrial Control
Communication Infrastructure
Contact:betty yang
Phone:886-18126447568
Email:sale_seqentech@163.com
Add:Room 1512, 15th Floor, Lucky Centre, 165-171 Wan Chai Road, Wan Chai, Hong Kong