The tpt1255 device is a can transceiver that conforms to iso11898 high speed can (controller area network) physical layer standard. The equipment is designed for can FD networks up to 5 Mbps, and improves timing margin and higher data rate in long and high load networks. As a design equipment, it has cross line, overvoltage and loss grounding protection − 42 V to +42 V, over-temperature shutdown, a − 30 V to +30 V common mode range.
Tpt1256 has auxiliary input / output level, power input threshold and RXD output level of mobile input pin, and the device has mute mode, which is also commonly referred to as listen only mode. It includes many protection functions to enhance the robustness of devices and networks.
The tpt125x is packaged in sop-8 and dfn3x3-8l and is characterized by -40 ° C to +125 ° C.
function
Comply with iso11898 standard
Supports can FD and data rates up to 5 Mbps
Typical loop delay: 110 NS
5 V power supply, 3.0 V ~ 5.5 V IO interface
Receiver common mode input voltage: ± 30 V
Busbar fault protection: ± 42 V
Up to 110 nodes in the can network
Joint temperature from − 40 ° C to 150 ° C
Latch performance over 500 mA
Bus pin ESD protection:
− ± 15 kV IEC contact ESD
− ± 15 kV manikin
− ± 1.5 kV live equipment model
Application:
All devices support high load can network
Field industrial automation, sensors and drive systems
Building and safety control system
Energy storage system
Telecom base station status and control
Contact:betty yang
Phone:886-18126447568
Email:sale_seqentech@163.com
Add:Room 1512, 15th Floor, Lucky Centre, 165-171 Wan Chai Road, Wan Chai, Hong Kong